Medilogic plantar pressure measurement system

The plantar pressure measurement system developed by medilogic company of Germany can collect plantar pressure in real time through 64 pressure sensors on each foot pad, and transmit the signal to the computer for processing and analysis. It is widely used in biomechanics, sports training, rehabilitation medicine and ergonomics. As a supporting technology in the field of gait research, foot disease diagnosis and sneaker design, plantar pressure measurement has experienced the development of pedography, soleography, force plate, force platform, in shoeplantar. Based on the footprints or traces left by human feet on the deformable materials such as gypsum and rubber, footprinting technology makes a qualitative judgment on the pressure and distribution of the sole. Plantar pressure measurement is an important application technology in gait analysis, clinical foot disease diagnosis and treatment, sports shoes design and other fields, as well as a powerful tool for biomechanical research.

Detailed introduction

Technical parameters of medilogic plantar pressure measurement system

Plantar pressure measurement system

The foot pad dynamometer developed by medilogic company of Germany can collect foot pressure in real time through 64 pressure sensors on each foot pad, and transmit the signal to the computer for processing and analysis. It is widely used in biomechanics, sports training, rehabilitation medicine and ergonomics.

Characteristic:

1. Each one contains 64 FSR high-sensitivity pressure sensors, which can test the foot pressure changes under various sports conditions such as standing, walking, running, etc. Pressure range: 0.5 - 65 n / cm2 sampling frequency: 60Hz or 300Hz

2. It can transmit the sole pressure signal in real time and wirelessly, and control and analyze it by software.

3. Convenient recording, stop and playback functions.

4. It can display the pressure value, three-dimensional grid, color pressure spectrum, and compare the pressure on one side or left and right.

5. Cop of pressure center, maximum pressure and mean pressure can be calculated.

6. Data can be stored and converted to multiple formats

System configuration:

1. insole: 3-5 pairs

Each contains 64 FSR pressure sensors

Dimensions: 35 / 3637 / 38, 41 / 42, 43 / 44,

45 / 46 (also with floor mat)

2. Transmit modem:

Weight: 150g

Power supply: 9V standard battery

3. Computer receiving modem:

Weight: 110g

Port: RS232 serial port

Power supply: 9V standard battery

Wireless transmission:

Frequency: 433.92 MHz

Scope: more than 100m indoor, more than 20m indoor

Digital transmission rate: 38.4 KB / S

Frequency: 433.92 MHz

Scope: more than 100m indoor, more than 20m indoor

Digital transmission rate: 38.4 KB / S

4. Laptop configuration:

4 m 2.0 MHz, 256 MB ram,

30g hard disk, CD-RW recording

Cushion type pressure measuring system

The cushion type pressure measurement system developed by medilogic company of Germany can collect the pressure value in real time through the pressure sensor distributed on the cushion, and transmit the signal to the computer for processing and anal