| |
The IMS series single point sensor is a resistive diaphragm pressure sensor that allows static and dynamic testing of forces between 2 surfaces. An ultra thin sensor (100 microns thick) is convenient for direct testing.
AI dynamic IMS thin film resistor sensor using double-sided polyester substrate were printed silver electrodes, stress sensitivity, insulation, glue, and then on the 2 layer of substrate face package, terminal 2 electrodes on the crimp male end or a female end. The sensor is used to test the vertical force of the sensor plane. The 2 wire outside the sensor is a resistor, and the resistance of the sensor is very large under static (without force or bending) conditions (>1M). Applying force on the effective area of the sensor will lead to a decrease in the resistance between the 2 leads of the sensor, and the greater the applied force, the smaller the resistance.
IMS series of film resistance type pressure sensor is neither dynamometer nor strain gauge, although they have very similar properties, IMS is not suitable for accurate measurement
The amount of.
VS resistance curve of IMS sensor (force versus resistance), the force and resistance characteristics of typical VS resistance curve of.IMS force sensor IMS series sensor is pressure range can be adjusted according to the test of customer demand.
.....................................................................................................................................................................
Thin film force sensor in some measuring space restrictions, with light, small volume, high linearity and no alternative advantages to replace bulky heavy LOADCELL force sensor.
Medical applications: dental occlusion pressure measurement, tissue pressure, clinical doctor patient intubation contact force test measurement, cardiopulmonary resuscitation, artificial respiration rescue training (CPR) (position, depth, frequency) pressure measurement and diagnostic equipment of muscle joint activities, pressure pronunciation correction, smart insole pressure balance control (the elderly to walk people walk down alarm) and severe patients, the elderly care alarm, injection pump and infusion pump pressure test.
Car applications: occupant detection, airbag pressure on the passenger, trailer brake control.
Clothing: knitted apparel pressure, sole and insole pressure test.
Recreational use: sports equipment, fitness equipment, grip strength measurement, GOLF grasping force training.
Industrial applications: quality control, safety devices, packaging and sealing, automated production.
Other: animal or human jaw force measurement, touch force equipment, grip, equipment monitoring, robots, etc..
.....................................................................................................................................................................
Purchase notes:
1, about the range: in order to measure more accurately, by using the formula adjustment force sensitive material, single point sensors of the same type multiple range, select the suitable sensor range according to your needs, and at the time of purchase indicated in remarks;
2, on the wire: regular wire length of 100mm, if you need to cut the length of the wire and re hit the terminal, please note to the customer at the time of purchase or note in the note;
3, about terminals: for your convenience, we provide |
|
