ENGLISH  |  JAPANESE 
 
 
Phone:+0086-512-51910068
Cell:+0086-18900616086
WeChat:18900616086
QQ:1021308596
E-mail:el-longshow@hotmail.com
 
 You are here >> All products >> Pressure Mapping Systems >> consumer electronics >> Distributed pressure sensor
 
Product Code:
Distributed pressure sensor
Specifications:
   
 
   
 
Distributed pressure sensor and test system:
The system is developed and researched by the AI group according to the customized requirements of a world famous automobile enterprise. It is specially used for the analysis and recording of the distribution of shark fin antenna in the automotive industry. The membrane pressure sensor used in the system consists of 4488 sensing units with a minimum resolution of 2mm * 2mm, and an effective sensing area of 210mm * 90mm. The system adopts two industrial level data acquisition devices to collect data, and the acquisition speed is up to 30ms/ frames. Equipped with a sound system of data analysis software with the standard Ai Group offers a dynamic thrust, engineers can intuitively understand the computer to compression range, shark fin antenna, the pressure degree of compression area and average pressure value.
The hardware consists of two industrial data collectors, a number of customized pressure test sensors (providing follow-up supply services) and an electronic pressure gauge. The group provides detailed instructions for the product and instructs the field engineer to load and use the complete system. Even if the customer in the use of any problems encountered, Ai Group's FAE engineers will always serve customers.
AI group combined with scenarios for the customers customized development and system corresponding to the data analysis software, to support the customer (including the international multi language support) and data display, parameter setting, file storage, custom function. The function of the software is simple and easy to use, the interface is beautiful and generous, and it provides the following maintenance and upgrade service.
Plantar pressure distribution sensor and detection system:
AI dynamic plantar pressure distribution measurement system for detecting user standing or moving pressure size and distribution information of foot contact with the ground, detection and evaluation of derivatives can be used to the long jump, high jump, sprint, hurdle track and field project and so on walking speed, cadence, stride length, support / vacated the parameters such as, walking, marathon, ball games movement of the gait cycle parameter test and the athletes understand signs state. In addition, combined with expert knowledge can also be used for foot feature recognition, such as flat, high arch, before and after the rotation, bunions, plantar aspect ratio anomaly detection.
Property parameter remarks
Sensing points: 4 points / cm - can be customized
Spatial analysis of sensels / cm - - 4
Sensing chip size: 500mm * 500m can be customized
Technical principle: piezoresistive - -
Thickness: 0.15 mm -
Pressure range: 1 ~ 150 PSI can be customized
  • On a product: Important technical indicators:

  • Next product: Single point and multi-point pressure sensors:
  • Hits:1161  Entry Time:9/23/2017 【Print this page】 【Close
    Copyright: Suzhou Long-Show Photoelectric Technology Inc. Tel :86-512 -51910068
    Pressure and Force Measurement_Thin film Pressure Sensor_Force Sensor_thin film force sensor_Pressure
    Distribution_Dental Occlusal Analysis_Body Pressure Measurement System_Pressure Mapping